OLIFE Beamwalk T3 Lighted Trekking Poles

Olife brings trekking poles into the next generation with the Beamwalk T3 Lighted Trekking Poles. It is innovatively equipped with integrated 360-degree LED lighting—that features stepless dimming, and 4 light settings with a 30-second standby function—to not only provide stability and support as you hike, but also bring the convenience of lighting in different hiking and camping scenarios including emergencies. The lights are powered by removable, USB rechargeable battery packs that can be swapped for the included lightweight caps to save weight. While having all the great features of traditional trekking poles, the poles are also resistant to 1.5-meter drops and rated IPX6, so they can handle harsh conditions. Versatile and reliable, the Beamwalk T3 is the perfect companion for your hiking and camping adventures.

Please Note

This product is NOT intended to be the primary light source if hiking at night.

Unique, Integrated 360-Degree Lighting

The integrated LED ring, located under each pole's grip extension, casts a downward 360-degree beam which is up to 19.7 ft (6 m) in diameter when 3.3 ft (1 m) from the ground, allowing you to walk naturally and more safely surrounded by light to see your immediate area.

By adding just 2.3 oz of extra weight, the Beamwalk T3 easily converts from a pair of traditional trekking poles to one that provides the convenience of lighting!

FAQ

General Questions

1. What is the difference between OLIFE Beamwalk T3 and the previous Trekpal T3 Telescoping Trekking Poles?

The OLIFE Beamwalk T3 innovatively integrates lighting into trekking poles to help you feel more confident in hiking. It has 2 modes for different scenarios and its separate, USB rechargeable battery pack, is extremely easy to detach and install.

2. How does it charge?

Press the button below the battery pack to remove the battery pack. Plug in the USB-C charging cable to start charging. Each battery pack can reach full capacity in just 4 hours, and charging is completed when charging indicator light turns green.

3. How to install the battery pack?

First insert the end away from the power button into the top of the pole, and then press the power end down to complete the installation!

4. I feel the power button is a bit hard to press.

The recessed design for the button is intended to eliminate the chance of accidentally pressing it while holding the grips. It's a "No Accidental Press" design.

5. Will the battery pack be sold separately?

We've taken it into consideration. Stay tuned!

6. How to hold a trekking pole by the wrist strap?

(1) Put your hand up through the bottom of the strap loop, then pull the strap down and grab the grip of the pole.

(2) Adjust the length of the strap loop so that when you bring your hand down in the strap it lines up comfortably with the grip.

7. What lighting modes does Beamwalk T3 have?

There are 2 lighting modes:

(1) Motion Mode: The Motion Mode has 4 light settings-neutral white (low), neutral white (high), red, and flashing red.

(2) Constant Mode: Using neutral white light only, the Constant Mode allows you to smoothly adjust the brightness of the light between 30 and 120 lumens.

Both modes have the memory function which allows the lights to default to the last setting used the next time you enter this mode.

8. The white light flashes once sometimes, is it broken?

Please check if it is in constant mode. If it is, when adjusting the brightness, the light will flash once to signal that it has reached the highest or lowest brightness level.

9. What is the maximum output?

120 lumens.

10. How much area is illuminated by Beamwalk T3 trekking poles?

When the light is 3.3 ft from the ground, (at 120 lumens, Neutral White) its beam diameter is 19.7 ft.

When the light is 3.3 ft from the ground, (at 30 lumens, Neutral White), its beam diameter is 13.1 ft.

11. How does the 30-Second Standby Function work?

When you stop to rest for 30 seconds, the lights will automatically change to a blinking red light which reminds you where the poles are. When it's time to go, pick them up, and they will automatically return to their previous setting.

12. Why are there no markings on the bottom extension of the poles? I think that will make it difficult to get the correct height.

To properly adjust the length of the poles, it is recommended that you fully extend the bottom, non-scaled section all the way to the position of the stop/limit line and lock it. Then adjust the scaled section to the desired height, which should make proper adjustments relatively quick and easy.

13. Lighting or lighter weight? The choice is yours.

Included with the Beamwalk T3 trekking poles are both battery packs and lightweight caps. This gives you the option to utilize the lighterweight caps in place of the battery packs when lighting may not be necessary. However, by adding just 2.3 oz of extra weight, the Beamwalk T3 easily converts from a pair of traditional trekking poles to one that provides the convenience of lighting!

14. Will there be an extra storage bag for accessories?

We've taken it into consideration. Stay tuned!